![[Laser cut and engrave] Layered Christmas Ornament – Reindeer on Slope & Snowflake](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/32a8f794-f3e0-49c4-8160-67051948c51c.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Layered Christmas Ornament – Reindeer on Slope & Snowflake](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Layered Christmas Ornament – Reindeer on Slope & Snowflake
Instruction
Information
A detailed layered wooden Christmas ornament featuring a reindeer on a snowy slope, pine trees and a raised snowflake. Designed for clean laser cutting from 3 mm plywood on A4 format and perfect for holiday décor or gift sets.
Instruction
Step1
HOW TO MAKE IT
Start by placing a 3 mm plywood sheet (A4 size) into your laser cutter.
Import the ornament design into XCS and set it to cut mode.
Use full power with strong Air Assist to achieve clean edges on the detailed snowflake and reindeer.
Once all parts are cut, lightly sand the edges to remove residue.
Prepare the three layers: the back base, the middle landscape layer, and the front frame with the snowflake.
Align the layers according to the reference image, ensuring the reindeer and snowflake sit on top for the correct 3D effect.
Apply a thin layer of wood glue between each layer, press them together, and clamp gently until fully dry.
The ornament consists of three pieces that must be glued together according to the picture and tightened with a clamp.
