Report
![[Laser cut and engrave] Laser Cut Wooden Reindeer Christmas Table Decoration with Bow](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/ca7971e0-81c6-49a5-b3cb-af42c34c6f20.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Reindeer Christmas Table Decoration with Bow](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Reindeer Christmas Decoration Stand
InstructionReindeer Stand - Briz Design
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
xTool P2
55W
xTool M1
5W, 10W
xTool M1 Ultra
10W, 20W
xTool S1
10W, 20W, 40WCompatibles · 7
Material used
1/8"(3mm) Basswood Plywood
Glue
Bow (opitonal)
3
116
Information
Laser Cut Wooden Reindeer Christmas Decoration
Cut out of 3mm plywood
Instruction
1
Step1: Material and settings
Preview
Preview
Choose your material and the correct settings.
Frame and then start the cut.
2
Step2
Preview
Glue the 2 bottom pieces together
The smaller one on top :D
3
Step3: Assemble
Preview
Preview
Take the reindeer and place it in the hole, left or right facing - your choice.
Tip!
You can glue it or leave it standing free, this is easier if you want to store it
or give it to somebody, so it will fit in an envelope.
4
Step4: Optional bow and other decorations
Preview
I added a little bow to the reindeer, with a little dot of glue.
If you want to keep it natural just use a piece of thin rope and tie it around the neck.
You can also add some fake snow to the underground.
Comments
