Report
![[Laser cut and engrave] Easter banner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e875350c-6a23-409a-bdc3-e80291627f63?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Easter banner
Instructioneasterbanner
.xcs
Application scenario
Laser (10min)
Machine & module
xTool D1 Pro
10WCompatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
20
409
Information
I did these two mini banners to hang on the front door knob during these holidays.
Instruction
1
Step1: Design
Preview
Preview
First I did the shapes of the banners, they are small because I didn´t want them too big for my purpose. They measure 10x12 cm more or less but if you want them bigger you just have to modify their size until you get the desire one.
Second, I added the other shapes, the egg and the rabbit. Then, I added the sentence I wanted to engrave. I used 90% of the laser power to engrave since I am going to paint over it later. In my case I used “Happy Easter” on both shapes but there are endless possibilities. I also wanted to cut some heart shapes into the egg shape so I added them too.
2
Step2: Cut and engrave
Once the design is finished, it is time for the xtool to work.
3
Step3: Decorate
Now it is time for you to enjoy using your creativity to decorate them as you like.
Have fun!
Comments
