Report
![[Laser cut and engrave] Laser Cut Wooden Star Wars Themed Wall Clock with Glow Hands / Star Wars Uhr aus Holz](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/e86e5925-1a41-4995-9ba5-636045e1cb75.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Star Wars Themed Wall Clock with Glow Hands / Star Wars Uhr aus Holz](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Laser Cut Wooden Star Wars Themed Wall Clock with Glow Hands / Star Wars Uhr aus Holz
InstructionStar Wars Clock
.xcs
Application scenario
Laser processing (160min)
Machine & module
xTool P3
80WCompatibles · 11
Material used
1/8"(3mm) Birch Plywood
7
37
Information
I need a new wall clock for the living room and so I tried to make one in a Star Wars design. The clock mechanism were purchased separately.
If you like it, I would appreciate a thumbs up.
Instruction
1
Step1: Star Wars Clock Instructions
It is very simple..
Put your 3mm Birch Plywood into your laser and fix it.
After the placement you start the process with the following settings →
Processing path → User defining
scanning path for engrave → one by one
By layer → on
Scanning way → from top to bottom
2
Step2: cleaning
You can use sandpaper carefully to remove smoke ( Sandpaper > 240.
Also wet wipes could help
3
Step3: clockwork mechanism
Preview
Preview
Preview
After the laser process and cleaning is done, you can mount the clockwork mechanism.
Comments
