HomeTemplatesFashion & WearablesBags & Purses
anjin12
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Leather Card Case with snap closure

Card Case 2 Pocket Snap Close4.xcs
Card Case 2 Pocket Snap Close4
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
20W
Compatibles · 5
Material used
Leather
129
865
Information
      Used XCS to create the cut file for the case. You could cut from wood and create a template to use on the leather, but I decided to cut it out with the D1 Pro. Ensure that the pattern card case is 107 mm wide for proper scaling.
Position and install your snaps, and punch and saddle stitch your case. SVG included for you to work with.
Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro

License

CC0