HomeTemplatesDecorHome DecorLighting
randy.gilbert59
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Easter Nite Lights

Remix
easter_pencilholder.xcs
easter_pencilholder
.xcs
Application scenario
Laser (60min)
Machine & module
xTool D1 Pro
5W
Material used
JYtrend Super Bright LED Lites, 3mm oak recut from 3/4x6 oak flooring at my shop.
Gorilla Super Glue and Colored Vullum Paper
3mm Basswood Plywood
Vellume paper
64
608
Information
      These are remixes from pencil boxes. I downloaded them and changed the sizes and cut outs. I also cut out bottoms and tops to hole the LED Lites.  The light on the right is cut from 3mm oak that I recut in my shop. The other 2 are out of 3mm bass wood from amazon.

This remix is based on

https://creativecommons.org/licenses/by-nc/4.0/
https://creativecommons.org/licenses/by-nc/4.0/
Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA