Report
![[Laser cut and engrave,Blade cut,Foil transfer] Laser Cut Wooden Christmas Gnome Ornament with Star Hat and Bauble](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0c9edfb8-0917-46c2-9709-4059444084e4.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,Blade cut,Foil transfer] Laser Cut Wooden Christmas Gnome Ornament with Star Hat and Bauble](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Christmas Gnome Ornament with Star Hat and Bauble
InstructionChristmas Gnome - Briz Design
.xcs
Application scenario
Laser processing、Blade cut、Foil transfer
Machine & module
xTool P2S
55W
xTool M1 Ultra
10W, 20W
xTool F1
10WCompatibles · 9
Material used
1/8"(3mm) Birch Plywood
1
10
Information
Laser Cut Wooden Christmas Gnome Ornament with Star Hat and Bauble
Instruction
1
Step1: Open and choose your gnome
Preview
There are 2 different process methods in the file.
You can cut it out, or engrave and cut with an offset.
Or do both :P
Take your pick
2
Step2: Cut out version
Preview
Choose your material (paper, wood, acrylic etc. can de used).
Adjust the settings for your material, frame and cut.
3
Step3: Engrave and cut version
Preview
Choose your material (paper / wood).
Adjust the settings for your material for engraving and cutting, then frame and start.
Comments
