M1 Ultra Pen Engraved Acrylic LED Lamp

Prepare the engraving pen and the acrylic sheet from the box

Print the adapter with your 3D printer.
Insert the M3 square nut into the hole
Insert the engraving pen into the adapter and tighten the M3 screw to hold the pen in place

Create a new custom pen 
Name: xxxx, Type: Other, Stroke: 0.1

Insert the acrylic sheet onto the cutting mat (the blue one) and secure it with tape
Insert the adapter into the pen holder a choose Pen drawing mode

Choose your favorite picture
Set the following parameters:

• Drawing pen: Your custom pen
• Color filling: If you want to engrave filled areas
• Pen pressure (g): 85
• Speed (mm/s): 85
• Pass: 1
• Line spacing (mm): 0.08

Keep the door open and press Process :-)

PRO TIP: I recommend using the Weld function if you don’t want the engraving to overlap itself. 😄