Report
![[Laser cut and engrave] Laser Cut Wooden Santa Claus Christmas Keychain Ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/6a7ba38d-f05c-423d-993f-3e3389f947e7.JPG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Santa Claus Christmas Keychain Ornament](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
🎄✨ Laser-Engraved Santa Keychain – Cute Christmas DIY Gift
Remix
InstructionWeihnachtsmannanhänger_CC0
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3
22
Information
This adorable laser-engraved Santa keychain is based on a CC0 Santa illustration found here on Atomm and turned into a clean, ready-to-use XCS file.
https://www.atomm.com/template/73077-laser-engraved-santa-claus-christmas-ornament-on-wood
Perfect for quick Christmas gifts, markets, stocking stuffers, or as a fun seasonal crafting project.
This remix is based on
Laser Engraved Santa Claus Christmas Ornament on Wood
yoyo123qwertInstruction
1
Step1: Download Template
- Download the file.
- The default size is approx. 45–55 mm tall – feel free to scale as needed.
2
Step2: Cut Material
Set up your xTool machine for engraving and cutting:
| Task | Power | Speed | Pass | Module |
|---|---|---|---|---|
| Cut (Outline) 3mm | 100% | 10 mm/s | 1 | 20 W |
| Cut (Outline) 1/8" | 90% | 4 mm/s | 1 | 20 W |
3
Step3: Clean & Assemble
- Remove the piece from the wood carefully.
- Optionally sand the edges lightly.
- Add your keyring through the top loop.
Comments
