Report
![[Laser cut and engrave] Laser Cut Wooden Star Christmas Ornament Hanging Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/1eba43c0-e3e7-4009-aa8f-286990de8223.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Star Christmas Ornament Hanging Decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Star Christmas Ornament Decoration - Laser Cut Wooden
InstructionOrnament - Star
.xcs
Application scenario
Laser processing (4min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
4
17
Information
Star Christmas Ornament Decoration - Laser Cut Wooden. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Open the Ornament - Star.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
Comments
