HomeTemplatesDecorHome DecorShelves & Holders
masquepapel
Report
[Laser cut and engrave] Cross Candleholder
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Cross Candleholder
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Cross Candleholder
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Cross Candleholder
[Laser cut and engrave] Cross Candleholder
[Laser cut and engrave] Cross Candleholder
[Laser cut and engrave] Cross Candleholder
[Laser cut and engrave] Cross Candleholder
[Laser cut and engrave] Cross Candleholder

Cross Candleholder

Cross Candleholder Masquepapel.xcs
Cross Candleholder Masquepapel
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool D1
5W
Compatibles · 11
Accessories
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro/D1 Air Assist Set
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
257
1573

Information

      Easter candle holder, made with 2 mm plywood with a 3 mm base, painted with gold acrylic spray.
Completely editable design and suitable for beginners, for optimal results use the air assist.
*Includes base for tea lights candles.
*includes Spanish version
Comments

Remixes

xTool Supplies Used in This Template

xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro/D1 Air Assist Set
xTool D1
xTool D1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-SA