Report
![[Laser cut and engrave] Christmas counter / Days until Christmas](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/c21863f1-b657-474e-bdf1-ba332d4fbfae.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas counter / Days until Christmas
Instruction
Days untill Christmas
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
10WCompatibles · 11
Material used
1/8" Birch Plywood
1/8"(3mm) Birch Plywood
2
15
Information
Christmas Counter
Instruction
1
Step1
The design drawings on the model are just an example. Feel free to use the designs and the language you prefer.
2
Step2
Preview
For building this christmas Counter you need a sample bag clip (in german musterbeutelklammer)
3
Step3
First take the big disc (with the numbers), place the second disc (with the writings) on top of this. The holes from the two pieces must be on top of each other. Stick the sample bag clip through the holes and bend it on the back. Now glue the smallest disc with the bigger hole in the middle on the disc with the writings. The head of the clip has to be in the middle of this. Be careful with gluing. At last glue the small disc (the one with the deer) in the middle of your christmas counter.
Comments
