Report
![[Laser cut and engrave] Laser Engraved Copper Christmas Ornament in Protective Box](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/d95ab1af-535b-43c1-bf1c-49173dd44f89.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Copper Christmas Ornament in Protective Box](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
F2 - Cardboard cubic box for christmas bauble
Instructioncube en carton
.xcs
Application scenario
Laser processing
Machine & module
xTool F2
10WCompatibles · 12
Accessories
xTool F1 Slide Extension
Material used
Kraft Paper-9oz(300g)
2
23
Information
I needed a way to protect the engraved christmas ornament I made.
Owning an XTOOL F2, impossible to use a "standard" box template as the design would have scaled down the box to less than 4 cm. therefore, I created this one to be used with the slide extension and allowing boxes up to 115mm.
Instruction
1
Step1: scale to your need
Measure the item you want to protect.
Select all, lock proportions and change the heignt to the size of your item.
My bauble was 78mm diameter, I chose 78mm as the height.
lauch the job.
2
Step2: there are 2 canvas !
don't forget to do the 2ndone, a box has 6 sides !
3
Step3: glue the 2 parts
Englue the tab next to “bottom” of the 1st canvas (not the one next to “top”, its' from here you can open and put your precious items in the bos)
Englue the 2 tabs on the second canvas
assemble and wait until it's dry.
Comments
