Report
![[Laser cut and engrave] Glow in the Dark Halloween Ghost Pattern Stainless Steel Tumbler with Straw](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/ed33a9c8-8570-4f87-9234-600c9c53a259.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Glow in the Dark Halloween Ghost Pattern Stainless Steel Tumbler with Straw
GhostTumblerAI
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 11
Material used
Cream White to Silver Stainless Steel Tumbler with Handle 40oz(1183ml)
1
21
Information
These glow in the dark tumblers are perfect for making Halloween tumblers. They shine incredibly bright in the dark. You can engrave or sublimate on them. The Atomm AI made a cute ghost pattern that was perfect for it.
Instruction
1
Step1: Place tumbler on XCS roller
Preview
Wipe the tumbler down to remove any fingerprints or debris.
Place the tumbler with the top side (mouthpiece) facing to the right in the machine so you do not have to alter it in XCS.
Follow the prompts- be sure the red dot measure the highest point of the tumbler. Auto-measure the height. I used the XCS roller vs the rotary so I did not need to enter a circumference. If you use the rotary, you will need to enter the proper measurements. Due to this tumbler being perfectly cylindrical with no taper the rollers worked perfectly.
2
Step2: Measure twice, cut once!
Preview
Since I did not measure perfectly I added some bold lines, and added the persons name that I made the tumbler for.
When you are done clean the tumbler with rubbing alcohol or soapy water.
Comments
Remixes
xTool Supplies Used in This Template
Related collections
Related tags
License
This work contains AI-generated content.