Report
![[Laser cut and engrave] Laser Cut Wooden Frame with Acrylic Clip and Measurement Grid](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/627815af-f187-4daf-a4a2-af5ad1e75c02.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
RFID Blocking Minimal Wallet JIG
InstructionRFID Wallet JIG
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8" Basswood Plywood
1/8"(3mm) Basswood Plywood
1
6
Information
This is my first jig, and is working well for the product I have on hand
https://www.aliexpress.us/item/3256809512259847.html
I'm using a Amazon Basswood pack, ESRICH Basswood Sheets 48 pack, quite smokey, 75% 10mm Cut with #3 Air Assist seems to keep the soot down on most of the cuts with this batch.
"Read Me" instructions on the file, enable/disable colored layer cuts as needed
Don't forget to get each piece snugly into the cutout and take a height on each batch.
Instruction
1
Step1: Cut Wallet Money Clip Insets 2 Sheets
Color Layer Coding:
Yellow -- Trimming of the Jig (Always On)
Purple -- Wallet Money Clip inset (Cut 2 sheets)
Use the Show Layers, "Output" enable to cut or not cut the particular layer. Once all sheets are cut, glue the two Money Clip insets first.
2
Step2: Cut Wallet Inset Sheet
Color Layer Coding:
Yellow -- Trimming of the Jig (Always On)
Cyan -- Wallet Cut (Cut 1 Sheet)
Use the Show Layers, "Output" enable to cut or not cut the particular layer. Once sheet are cut, then glue the Wallet Cut on top of the money clip inset, the wallet should fit snugly into
the cut allowing for batch engraving of 8 wallets.
Comments
