Report
![[Laser cut and engrave] Children Easter Bunny Egg Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2e501e3f-22b1-4c6f-a8dc-c3ffe518502b?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Children Easter Bunny Egg Earrings
Instructionearrings
.xcs
Application scenario
Laser (3min)
Machine & module
xTool F1
Material used
Basswood Plywood
41
854
Information
Use your xTool laser machine to make fun projects with your kids like these Easter Bunny Egg Earrings Set. Very easy to do and lots of fun!
Instruction
1
Step1: What you will need
For this project, you will need an A5 Sheet of Plywood, some masking tape and paint or colour pens if you are not happy with the natural finish.
2
Step2: Instructions
Preview
First, cover the plywood with masking tape to avoid any burnings on the wood and protect it from the laser beam. Use 90% Power and Speed of 3. This design will take around 3 minutes to cut.
3
Step3: Enjoy!
Preview
Once your design is cut remove the masking tape and colour your earrings as you wish withe pens or acrylic paint. To protect them you can a layer of UV Resin. Attached your pins with a little bit of glue at the back and that's it! You have a wonderful pair of earrings.
Comments
