Report
![[Laser cut and engrave] Laser Cut Wooden Carpenter Square with Screw Fasteners](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/401ed7cc-f3d3-4c18-9dd2-1b8f77ba9c0d.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
RA2 Pro Rotary jig with fastener holes
InstructionRA2PRORotaryjig
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20WCompatibles · 11
Material used
1/8" Basswood Plywood
1/8"(3mm) Basswood Plywood
1
82
Information
I am new to the Xtool s1. When I was trying out my RA2 pro rotary I found myself repositioning it all the time so for my 1st ever published file. A nice simple square with cut outs to fit the RA 2 perfectly. I made it with some nice holes to screw it down. My Xtool is on a plywood table top or you can put your Xtool on a piece of 3/4" plywood and then screw this into the base.
Instruction
1
Step1
This project is super simple. You need a wood base, cut out the project. Square it up to the base of your machine and fasten it to the wood base.
Comments
