HomeTemplatesHome DecorBox
douglaslibby
Report
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
Project made with xTool P2 machine for Halloween.
Project made with xTool P2 machine for Halloween.
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
Project made with xTool P2 machine for Halloween.
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
Project made with xTool P2 machine for Halloween.
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving
[Laser cut and engrave] Laser Cut Wooden Pirate Treasure Chest Box with Skull Engraving

Pirate Treasure Nip Alcohol Holder

Remix
Instruction
piratenip.xcs
piratenip
.xcs
Application scenario
Laser processing
Machine & module
xTool P2
55W
Compatibles · 10
Material used
1/8"(3mm) Basswood Plywood
3
28

Information

      Shrunk down this beautiful design to the size of an alcohol nip and added some design features to make it pirate themed.  I used 2mm thin wood from Temu and made a bunch for a Halloween party.  Insert the nip holder as the walls are being assembled.  The wall with the * is for the top of the bottle.  When assembling the top, I found doing 1 board top/bottom worked better than trying to align the other side with 6 inserts. 
 Using pliers helps with the hinges.  Just wiggle the pin as you pinch or push down to align the holes.  Have fun with it and design your own treasure chest !

This remix is based on

atomm-remix-cover
Treasure box
Holzkäpsele

Instruction

1

Step1: Assemble pieces per original design

I tried to just drag and shrink the original, but my rough draft was terrible and the hinges didn't align. I reworked the measurements, after using calipers, and on my 3rd draft I nailed it. 

Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC0