HomeTemplatesHome DecorBox
anja.groetzner
Report
[Laser cut and engrave] Box mit Schubladenauszug
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Box mit Schubladenauszug
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Box mit Schubladenauszug
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Box mit Schubladenauszug
[Laser cut and engrave] Box mit Schubladenauszug
[Laser cut and engrave] Box mit Schubladenauszug
[Laser cut and engrave] Box mit Schubladenauszug
[Laser cut and engrave] Box mit Schubladenauszug
[Laser cut and engrave] Box mit Schubladenauszug

Box mit Schubladenauszug

Instruction
BoxmitSchublade.xcs
BoxmitSchublade
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
10W
Compatibles · 11
Material used
1/8" Birch Plywood
1/8"(3mm) Birch Plywood
2
25

Information

      Lasergeschnittene Box mit Verblendung und einfachem Schubladenauszug.
Auskleidung mit Filz optional.

Instruction

1

Step1

The purple templates are for the box, the yellow ones for the facings and the handle, and the blue ones for the small drawer.

Please note that the template only works with 3mm thick material.

Wipe the laser-cut sides and then assemble with glue. 

Test beforehand, as the side parts are different.

Start with the box, then the drawer. Once these parts are dry, attach the facing around the box, insert the drawer, and then attach the facing for the drawer front. Attach the circle in the center of the drawer front and place the flower on top.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8" Birch Plywood
1/8" Birch Plywood
1/8"(3mm) Birch Plywood
1/8"(3mm) Birch Plywood

License

CC BY-NC-SA
This work contains AI-generated content.