![[Laser cut and engrave] Laser Engraving 5th Anniversary Celebration Tumbler](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/88ce5fd7-0f9e-430d-ac79-f8813c5be5e3.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Instruction
Select the material to be processed and move the entire design to the desired position on the processing canvas. Ensure that the orientation of the design matches the placement direction of the Tumbler. The size and length of the image should also correspond to the height and circumference of the Tumbler.
Connect the Rotary Attachment to the device and install the Tumbler. Place the Tumbler in the device’s processing area, ensuring that the device’s focal point is at the highest horizontal point of the Tumbler. Use the recommended parameters for processing, and perform a pre-processing preview before starting the engraving.
Note: Before processing the Tumbler, remove the handle to prevent it from colliding with the Rotary Attachment during engraving.
After processing, remove the Tumbler. You can moisten the Tumbler with water and alcohol, then use a brush to clean the processed areas to achieve the desired finish.
