HomeTemplatesMiniaturesArchitecture
jrpotocki
Report
[Laser cut and engrave] Gothic Buildings Blocks
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Gothic Buildings Blocks
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks

Gothic Buildings Blocks

Instruction
Gothic Blocks.xcs
Gothic Blocks
.xcs
Application scenario
Laser (120min)
Machine & module
xTool M1
10W
Compatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
66
753

Instruction

1

Step1: Cut out blocks

Gothic Buildings Blocks instruction: step 1 - Cut out blocks
Preview
Gothic Buildings Blocks instruction: step 1 - Cut out blocks
Preview

The houses and connectors are spread over three sheets.  Sheet 1 is connectors.  Sheet 2 contains most of the buildings, and sheet three has two more buildings and more connectors.  Cut which components you want.

2

Step2: Finish the Pieces

Gothic Buildings Blocks instruction: step 2 - Finish the Pieces
Preview

Paint or finish the pieces as you want.  I used colored paint markers in the yellow to purple range to be somewhat historically accurate,

Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC