Report
![[Laser cut and engrave] Give A Heck Coin](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/3a35bd27-bef4-421e-aee5-a1b614946f23.JPG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Give A Heck Coin
InstructionHeckGivingCoin
.xcs
Show 2 more
Application scenario
Laser processing
Machine & module
xTool F2 Ultra
40W, 60WCompatibles · 5
Material used
1.57"(40mm) Blank Commemorative Coins Brass
40mm Blank Commemorative Coins Brass
2
Information
Need to give a $@!%!? Now you Can! Or dont! My recommendation is to keep it, and dont give a $@!%!
Model sourced from pwmodder1027 https://www.printables.com/model/306195-fk-to-give-coin
Instruction
1
Step1: File Origin / Convert a STL
Preview
I used the 3D File by pwmodder1027 from Printables https://www.printables.com/model/306195-fk-to-give-coin and the workflow from the youtube video to convert the STL into a genuine depth map.
2
Step2: Load the xcs project / First Cut
Preview
Load up the .xcs and scale, as well as center the design onto your coin. Double check the position with the framing feature. Process and Start the Embossment.
3
Step3: Second Cut
Preview
Flip the coin (be carefull, it may be hot) go to Canvas 2 and repeat the same process for the Backside of the Coin.
4
Step4: Post Processing
Preview
Remove the oxide with a wire brush or a dremel, I used the nylon attachment loaded with polishing compound to polish
Comments
