Report
![[Laser cut and engrave] 3D Printed Decorative Medallion Featuring Snake Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/945ff36a-60da-49c4-9720-523187a54bfb.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] 3D Printed Decorative Medallion Featuring Snake Design](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Snake Coin Embossed
InstructionSnakeCoin
.xcs
Show 1 more
Application scenario
Laser processing (120min)
Machine & module
xTool F2 Ultra
60W, 40W
xTool F2 Ultra (Single)
60WCompatibles · 7
Material used
5/64"(2mm) 304 Stainless Steel Sheet
14
242
Information
I Embossed a Depth Map onto a Steel Blank Coin.
Depth Map sourced here: https://www.laser-pics.com/image/animals-depth-map-22da5/
All Credit to the OP Nicky Norton
Instruction
1
Step1: Load the xcs File
Open the .xcs File and center the design onto your Coin. Hit Process and start the cut.
2
Step2: Post Processing
Preview
remove the oxide layer with a wire brush or a dremel tool
Comments
