Report
![[Laser cut and engrave] Laser Cut Leather Wallet with American Flag Punisher Design](https://storage-us.atomm.com/resource/xart/result/539082/bf6aa2d7-3c12-47e6-96f1-ebd9ebfc58aa.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Leather Wallet with American Flag Punisher Design
Instruction
notebookholder
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 13
Material used
Brown Top Grain Cowhide Leather
8
167
Instruction
1
Step1
cut the three pieces. i used the s1 40w at 30 power, 16 speed, one pass.
glue left and right smaller piece unto the larger piece. i used contact cement.
use a compass to mark a line for stitching holes about 3mm from the edge.
punch holes about 4mm {or what looks best to you} along the mark made by the compass.
stitch together. i saddled stitched with nylon thread {not sure of thread thickness but under 1mm.
finish with preferred method. i used neetsfoot oil and resolene after protection.
engraved the punisher engraving with my f1 as an afterthought before oiling and resolene.{used xtool recommended settings)
Comments
