![[Laser cut and engrave] Laser Cut Wooden Earring Tag Holder with Sleepy Hollow Kraft Tags](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/de1d99d7-792f-4cd5-ad1d-919413f62fc4.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
F1 Earring Tag engraving jig
Instruction
.png?x-oss-process=image/resize,m_mfit,w_32,h_32,limit_0/interlace,1/format,webp/auto-orient,1)
Information
A jig made for the XTool F1 to engrave four (4) earring tag batches. Works with 50mm x 88mm (1 7/8" x 3 1/2") tags.
Instruction
Step1: Cut
Using 3mm plywood or similar cut one (1) Grid Piece, and one (1) Locating Plate. I used my XTool P2S, but any machine with a 210mm+ x 120mm+ bed will do! The Grid Piece has a score layer that will help you align it with the Locating Plate later.
Step2: Glue
Once both pieces are cut, carefully glue them together, making sure to keep both pieces square to one-another. Be careful to avoid glue squeeze-out, and clean up any excess glue. Pieces MUST be glued square otherwise it will be difficult to align when laying out your engraving on the F1.
Step3: Engrave
Use the provided F1 template to lay out you images/logo/text however you need. Make sure to adjust settings to your preferred tag, and run a few tests to make sure everything is aligned and that you successfully glued the components square/centered. Don't worry if something is misaligned, you can just adjust in the F1 template!
