Gena
Report

Cat Lover Welcome Sign

Instruction
Hope you like cats.xcs
Hope you like cats
.xcs
Application scenario
Laser (60min)
Machine & module
xTool P2
55W
Material used
Transparent Acrylic
Birch Plywood
3mm MDF Board
424
2614
Information
      I made this for people who like cats.
    
Instruction
1
Step1: Cut hanger holes and paint MDF round
Preview

Cut hanger holes then paint MDF round for base.

2
Step2: Cut bottom section out of 1/4" birch
Preview
Preview

The most important thing to remember is to save the “middles” when cutting letters that are not script. If you stick them on painter's tape on a paper plate they are easier to paint.

3
Step3: Cut outline for "Welcome"
Preview
Preview

Cut the background out of ¼" birch then paint in color of choice.

4
Step4: Cut "Welcome"
Preview

Cut acrylic from the back with both protective layers still attached for a cleaner finish. Image needs to be flipped. 

5
Step5: Glue wood and MDF then spray on gloss clear coat
Preview

Be sure to save acrylic “ Welcome” to glue on after clear coating.

Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm MDF Board
3mm MDF Board