HomeTemplatesDecorHome DecorWall Art
Ryan
Report
[Laser cut and engrave] Laser Cut Black Acrylic Dual Hook Stand Holder
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Black Acrylic Dual Hook Stand Holder
[Laser cut and engrave] Laser Cut Black Acrylic Dual Hook Stand Holder

Laser Cut Black Acrylic Dual Hook Stand Holder

Instruction
AcrylicStand.xcs
AcrylicStand
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
Compatibles · 11
Material used
1/8"(3mm) Black Acrylic
3mm Black Opaque Glossy Acrylic（3pcs）
4

Information

      Quick hook style stand.  Designed to be cut from 3mm material.  No gluing required, stand is easily assembled/disassembled by locking 2 side pieces with the center bar linking them through the cutouts.  Be sure the cutouts on the center bar face down.

Instruction

1

Step1

Cut at recommended settings for model.  The 2 hook pieces are identical and the center bar sets your width.

If you are intending on displaying a round object, this stand does not have the clearance for the curved edge.  

If you are using a different thickness of material (other than 3 mm), you will need to adjust the cut area where the center bar and both sides come together.

Comments

Remixes

xTool Supplies Used in This Template

xTool P2S
xTool P2S
1/8"(3mm) Black Acrylic
1/8"(3mm) Black Acrylic
3mm Black Opaque Glossy Acrylic（3pcs）
3mm Black Opaque Glossy Acrylic（3pcs）

License

CC0