Report
![[Laser cut and engrave] Laser Cut Wooden Fall Themed Decorative Magnets](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/1eef427f-81a9-4ffd-9a39-a70d5a1dd339.JPG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
🍂 DIY Fall Magnets – Bring Autumn to Your Fridge!
InstructionFallMagnets
.xcs
Show 4 more
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WMaterial used
1/8"(3mm) Basswood Plywood
1/8" Basswood Plywood
26
Information
Celebrate the cozy fall season with these wooden magnets. With engraved pumpkins, autumn leaves, and rustic harvest motifs, they are the perfect mix of practical and decorative. This project uses a laser cutter to engrave and cut two layers of wood that are glued together with a hidden magnet inside.
Instruction
1
Step1: Engrave & Cut the Front
- Place your material (e.g. plywood) into the laser.
- Engrave the design details for the front side.
- Cut out the outer shape.
2
Step2: Prepare the Back
- Engrave and cut the matching backside piece.
- Make sure to also include the outline frame for easy alignment later.
3
Step3: Assemble the Two Halves
- Place the engraved backside in the outline frame to keep it centered.
- Apply a thin layer of wood glue to the inside surface.
- Position the engraved front piece on top, pressing gently.
4
Step4: Add the Magnet
- From the back, insert a small round magnet into the cutout space.
- Secure it with glue.
- Allow everything to dry completely.
5
Step5: Enjoy Your Fall Decoration
Now your fridge, memo board, or office space can wear the colors of autumn too! 🍁
Comments
Remixes
xTool Supplies Used in This Template
License
This work contains AI-generated content.