Report
![[Laser cut and engrave] Millennium Falcon Blueprint Laser Engraved Canvas Print](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/e7605740-ff41-40b6-a4fe-a192b687ad97.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Millennium Falcon Blueprint Laser Engraved Canvas Print
Made to Empower
InstructionMilleniumFalcon
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool M1 Ultra
20W, 10W
xTool D1 Pro
10W, 20W
xTool M1
10W
xTool P2
55W
xTool P2S
55W
xTool S1
10W, 20W, 40WMaterial used
Coated Canvas (White+Yellow+Orange+Black)
Coated Canvas - White+Yellow+Orange+Black
canvas
51
954
Information
For best results, I recommend using 180-220 lines per cm for a higher resolution finish. After engraving, simply wipe the surface with a dry paper towel to remove any residue.
#MadetoEmpower
This was my first creative project. I based it on my favorite classic and designed it from scratch using xTool Studio. It took me three canvases before I finally got it right. Finishing it felt good because I proved to myself that I could learn a new skill, push through failure, and turn an idea I loved into something real. Since then I have made more for my friends and family.
Instruction
1
Step1: Material setup
Place the canvas as straight as possible inside your bed, Then use the marking tool to markout the bounds
2
Step2: Software
Center the design in the centre of the frame, make sure you align the x and y and scale the design to your frame
3
Step3: Clean up
Clean up the canvas with a dry paper towel, This step is crucial for best results.
Comments
