Report
![[Laser cut and engrave] Layers of mushrooms](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/49ecb654-e53f-421b-8e68-e640b3483e1a.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Layers of mushrooms](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Layers of mushrooms
The Creator Spark Challenge
Instructionmushroom_diorama
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
36
239
Instruction
1
Step1: Cut out the pieces
Preview
Cut out the pieces. When removing small cutouts from the middle be careful not to brake anything.
2
Step2: Paint the pieces
Preview
Paint the pieces any color you like. You can use appropriate colors or go with something else entirely. I found their natural colors a but too dull when I decided to paint the design so I tried a different combination.
Make sure you paint the correct side.
3
Step3: Glue the layers
Preview
Glue the layers together. Use wood glue or gel type superglue. I recommend you clamp the pieces together.
Try to align the layers as best as you can.
4
Step4: Final touches
If you didn't align the layers well together, you can sand the perimeter. This will also help it stand upright by itself.
Optionally you can also paint the perimeter to hide any defects and make a well rounded piece.
Comments
