Report
![[Laser cut and engrave] Bella - 3mm Birch Ply Coaster](https://storage-us.atomm.com/resource/xart/result/329439/2cbe533a-326b-4ff1-b626-f01989c7578f.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Bella - 3mm Birch Ply Coaster
Instruction
BellaWithoutBackgroundUse
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool F1 Ultra
20WCompatibles · 10
Material used
1/8"(3mm) Basswood Plywood
1
79
Information
Bella is the family dog and we used a picture of her when she was out in the garden this summer to help us create these stylish coasters.
Instruction
1
Step1
I used a pre cut coaster from 3mm Birch Ply and you should alter the setting to suit whatever material you use (slate, card, leather Etc).
Remember to run it 3 passes at 30 percent power for 1 minute and 41 seconds each run.
ather than one pass at 70 percent for
Comments
