Report
![[Laser cut and engrave] Jack-o-lantern tealight stand](https://storage-us.atomm.com/resource/xart/result/389041/f2e87146-fe5f-43a6-a971-1bb15613b87b.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Jack-o-lantern tealight stand
The Creator Spark Challenge
Instructionhalloween_tealight_holder
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
101
694
Information
A Jack-o-lantern tealight stand. It is easy to make and a perfect project for Halloween.
It will also project the image on a wall as seen in the first image.
If using an open flame such as a tea light, do not leave unattended.
Instruction
1
Step1
Preview
Cut out all of the pieces. Make sure you don't throw away the small T shaped pieces.
2
Step2
Preview
Glue the T shaped pieces in to the bottom part. Make sure they are all aligned.
3
Step3
Preview
Glue the head model to the previously assembled part.
Make sure it is perpendicular to the bottom part. If using wood glue, brace it with something to hold it in place.
Using a few drops of superglue is very helpful to keep everything in place.
4
Step4: Paint
As an optional last step, paint the model.
Comments
