Report
Multi-purpose jig
Instructionmulti jig
.xcs
Application scenario
Laser
Machine & module
xTool S1
40WCompatibles · 8
Material used
3mm Basswood Plywood
316
2285
Information
Tired of looking around for a specific jig for what I'm engraving.
Decided to make one that has most of the ones I use all on one sheet of wood.
Instruction
1
Step1: Measure the different things you engrave the most.
Measure the different things you engrave the most and make the shapes you need.
Be sure to measure what you are using because we all know that different brands are sometimes off of what's advertised. You can easily change the dimensions before you cut.
2
Step2: Add text
Add text to identify what they are for quick reference.
3
Step3: Engrave and cut
You can change the inserts out as needed. You can always add more on the square inserts that come out to suit your needs.
4
Step4: Remove all inserts and glue frame to a backing board.
Preview
After the glue is dried you can store the inserts in the slots.
Comments
Remixes
xTool Supplies Used in This Template