HomeTemplatesHome DecorDoor Sign
N.M. Lazerworx
Report
[Laser cut and engrave] Shhh in a meeting/Available sign
Project made with xTool S1 machine for Laser cut and engrave.

Shhh in a meeting/Available sign

Instruction
aVAILABLE.xcs
aVAILABLE
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3
57

Information

      My husband and I work from home at times and neither one of us are good at knocking to ensure the other person is not in a meeting.  I made these door signs so that way we could let the other person know not interrupt.

There are two files one file is for one side and one file is for the other side. I use the score settings to score and placement of all my cut out items when I do the second side I use the red beam to lineup. My already cut out sign

Instruction

1

Step1: Pre spray paint wood

I found it most helpful with this type of sign to pre-paint the wood.  I use rustoleum two times spray paint.  This helps the engraving show through real nice.

2

Step2: Turn off the air for the engraving

I  helpful to turn off the air during the engraving portion and scoring portion to minimize soot on the painted portion.

3

Step3

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC-SA