HomeTemplatesTools & Special MaterialsJigs
Faceless Fan
Report
[Laser cut and engrave] Laser Cut Wooden Bottle Opener Jig with Handles
Project made with xTool P2S machine for Laser cut and engrave.

Laser Cut Wooden Bottle Opener Jig

Instruction
BottleOpenerJigP2S.xcs
BottleOpenerJigP2S
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
Compatibles · 9
Material used
1/8" Basswood Plywood
1/8"(3mm) Basswood Plywood
3

Information

      I was tasked with an order for these openers. I needed a way to do more than one at a time.

Instruction

1

Step1

I started with the F1 doing one at a time. Then I purchased the P2S and was able to do more. I can not believe the difference, actually I can, between the F1 and the P2S. i did ⅔ of my project with the F1 and did a test on the P2S. I am not sure if I should finish with the P2S because of the difference in end product. I guess I will have to ask my wife her opinion. Happy Lasering!

Comments

Remixes

xTool Supplies Used in This Template

xTool P2S
xTool P2S
1/8" Basswood Plywood
1/8" Basswood Plywood
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC