Report
4x4 Door Sign
Instructiondoorsign
.xcs
Application scenario
Laser processing、Blade cut (240min)
Machine & module
xTool M1 Ultra
20WMaterial used
1/8"(3mm) Basswood Plywood
1/4"(6mm) Basswood Plywood
3mm Black Opaque Glossy Acrylic（3pcs）
3mm White Acrylic
Ombre Cardstock
Alcohol Markers
3mm White Oak Plywood
Glossy Black Vinyl
Wood Glue
Acrylic Glue
5
Information
Multilayered Door sign I use for a reminder. Of course, you can change the lettering to whatever you like. I constantly forget to close my garage, so this is a helpful reminder.
Instruction
1
Step1: Cuts and assembly
Preview
Pretty straightforward assembly. The back plate is cut from 6mm basswood. I attached ombre cardstock to it with wood glue before cutting. The front frame is cut from 3mm White oak. The background tree layer (green) is engraved with a lighter setting than the midground trees and rocks (blue). Then I used a green alcohol marker over the engraving. For the rocks, do not combine them. They need to stay separated for the detail to work properly. I used a light grey alcohol marker to shade them. I sourced my white acrylic from Hobby Lobby, but you can use whatever you like. You can also change the wording.
Comments
