HomeTemplatesToolJig
huffy6696
Report
[Laser cut and engrave] F1 Ultra Coin Jig
Project made with xTool P2 machine for Laser cut and engrave.

F1 Ultra Coin Jig

Instruction
Coin63x11mmF1UltraJig.xcs
Coin63x11mmF1UltraJig
.xcs
Application scenario
Laser processing (2min)
Machine & module
xTool P2
55W
Compatibles · 10
Material used
1/8"(3mm) Birch Plywood
7
101

Information

      Easily center your coin for embossing or engraving. Made with P2 and 3mm Birch, but any 3mm material and machine that can cut greater than 8" should work.

EDIT: updated the design to make it easier to remove the coin.

Instruction

1

Step1

  1. Cut file using settings for your material.
  2. Using thumb screws from F1 Ultra “L” Bracket, affix corners to F1 Ultra Baseplate
  3. Align image to center of work area (not center of template)
Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
1/8"(3mm) Birch Plywood
1/8"(3mm) Birch Plywood

License

CC0