Puzzle Piece Photo Frame – “LOVE” Design (9×13 cm)
Instruction
Information
A vertical wooden photo frame for 9×13 cm photos, laser-cut from interlocking puzzle pieces with the word “LOVE” integrated into the design. Perfect as a romantic gift, wedding decoration, or personalized home décor. Made from 3 mm birch plywood and ready to be painted, oiled, or left natural.
Instruction
Step1
Specifications:
Material: 3 mm birch plywood
Orientation: Vertical (portrait)
Photo size: 9×13 cm
Design: Interlocking puzzle pieces with “LOVE” cut into the frame
Finish: Natural, painted, or varnished
Assembly: Flat-pack parts slot together, no glue required
Tools & Materials:
xTool S1 (20W)
3 mm birch plywood
Masking tape (optional)
Clear acrylic sheet for photo protection (optional)
Laser Settings (xTool S1 – 20W):
Cutting: 100% power, 6–8 mm/s, Air Assist ON
Engraving (optional): 35–40% power, 120 mm/s, 318 LPI
Step-by-Step Instructions:
Design Preparation
Create a rectangular frame with puzzle-piece edges.
Add “LOVE” lettering cut-outs at the top or side.
Leave a 9×13 cm opening for the photo.
Material Setup
Place 3 mm birch plywood on the laser bed.
Apply masking tape if you want cleaner cut edges.
Cut the Frame Parts
Cut the puzzle-piece frame, backing board, and optional acrylic insert.
Assembly
Slot the puzzle-piece edges together.
Insert the backing and photo.
Add the acrylic sheet if used.
Finishing
Sand edges if needed.
Paint, oil, or varnish for protection and style.
Uses:
Romantic gifts
Wedding or anniversary décor
Personalized home decoration
Craft fair or shop product
🔗 Find more handmade designs:
🌐 Website: https://sites.google.com/view/gklwooddesign/domovská-stránka
📷 Instagram: https://www.instagram.com/gkl_wooddesign
