Report
![[Laser cut and engrave] Car Enthusiast Sign for Man Cave](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/165e2d85-c690-4ab6-8e18-af4946ad5a51?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Car Enthusiast Sign for Man Cave
InstructionLife is better in the fast lane
.xcs
Application scenario
Laser (60min)
Machine & module
xTool P2
55WCompatibles · 5
Material used
1/8"(3mm) MDF Board
3mm MDF Board
28
728
Information
I made this for a booth I am going to have at a car show. Cars are not actually my thing but since cars are the theme I am going to have about ten items related to cars and Route 66.
Instruction
1
Step1: Cut MDF
Preview
Total cut time took 31 minutes.
2
Step2: Paint Base Board and Cut Pieces
Preview
I use Sherwin Williams paint and purchase the quart paint samples for around $9.00 each. I used red, white, black and orange for this project. I applied two coats to each piece using a small roller for the base piece and sponge pieces for the cutouts. It dries quickly.
3
Step3: Glue the pieces and clear coat
Preview
Starbond Thick from Amazon is my go to glue. I glued the pieces to the base and then finished off the project with a coat of Rustoleum 2Xs clearcoat.
Comments
