Report
Perfect Gift: Technical Flow Chart
InstructionFlow_Chart_Content_Center
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 8
Material used
3mm White Ash Plywood
2
25
Information
The text of the template is in English and can be edited!
This technical flow chart is a classic which is now coming to your xTool machine! It is the perfect gift for every mechanic, engineer or simply pofessional home owner. The gift for those who have everything.
Instruction
1
Step1: Measure and adjust
I think the WD-40 ml are everywhere the same size but the tape must be definitely measured and the hole in the design adjusted. That would be the first step.
2
Step2: Arrange on laser plane
Arrange the material on the laser plane of your laser. It is important to fix the material as good as possible to prevent any splip during engraving and cutting.
3
Step3: Engrave and cut
Engrave and cut the piece with the best material settings. The settings are best determined before the process.
4
Step4: Assemble the piece
Assemble the feet and put in the tape and the WD-40. Depending on your fit, the tape and spray may need a little transparent tape to prevent falling out during transport.
5
Step5: Present the gift
You did it. You just created the perfect gift! Now enjoy making someone happy! :)
Comments