HomeTemplatesDecorHome DecorWall Art
WM Laser Creations
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

The Old Rugged Cross hym

Instruction
2.svg
2
.svg
Application scenario
Laser (25min)
Machine & module
xTool S1
40W
Material used
3mm Basswood Plywood
420
1872
Information
      Magnet made out of layered cross
Instruction
1
Step1: Painted the 12x12 basswood white with spay paint

Got a 12x12 sheet of basswood plywood and painted it white with spray paint from lowes. Let it dry. 

2
Step2: loaded file into XCS and ran project

Then ran project files after telling it to ignore the faith part of the file and it cut and engraved the cross and hymn into the cross, then got a plain basswood plywood and cut out the part of the project for the word faith.

3
Step3: Glued faith to the cross

After all the file was engraved and cut I glues the cut out of faith to the cross. I had bought a roll of strip magnet that can be cut to length and cut it 2 inches. Stuck the magnet to the back of the cross and it was complete.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-ND