HomeTemplatesDecorHome Decor
Laser Larry
Report
[Laser cut and engrave] Wooden Bowl
Project made with xTool F1 machine for Laser cut and engrave.
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Bowl
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Bowl
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Bowl
[Laser cut and engrave] Wooden Bowl
[Laser cut and engrave] Wooden Bowl
[Laser cut and engrave] Wooden Bowl
[Laser cut and engrave] Wooden Bowl
[Laser cut and engrave] Wooden Bowl

Wooden Bowl

Bowl Project.xcs
Bowl Project
.xcs
Application scenario
Laser (30min)
Machine & module
xTool F1
Compatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
675
4697

Information

      I saw this project discussed on the F1 Official Facebook group by Ian Dorosh and gave the design a try.

I made three sizes of bowls. I made a small 4" bowl (without taping) on a F1. Then made a couple larger bowls taped to prevent scorch marks at 6" and 12" on the S1.

Pretty easy to make and cut. It does take a little patience glueing them together. The results are pretty cool.

Next time, I'll engrave a design on the base of the bowl.
Comments

Remixes

xTool Supplies Used in This Template

xTool F1
xTool F1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY