Paw Patrol Wooden Puzzle – Laser Engraved Animal Rescue Fun (Paintable Option)
Instruction
Laser-engraved wooden puzzle featuring Paw Patrol heroes. Great for kids to learn and play! Made from 3mm plywood, A4 size. Available as engraved-only or with painting option. Fun, educational, and ready to customize. For personal use only.
🛠️ Laser Cutting & Engraving Instructions
For xTool S1 – 20W | Material: 3mm plywood | Format: A4 (210×297 mm)
1️⃣ Material & Setup
Material: 3 mm plywood
Sheet size: A4 (210 × 297 mm)
Laser machine: xTool S1 – 20W
Air Assist: Auto mode (stronger airflow during cutting)
Alignment aid: 3D-printed corner jig recommended for repeat cuts
2️⃣ Cut Settings
Power: 95%
Speed: 6 mm/s
Passes: 1–2 (depending on material and quality)
Mode: Cut
Air Assist: ON (auto high for cutting)
3️⃣ Engrave Settings
Power: 60–80% (depending on desired depth)
Speed: 200–250 mm/s
Lines per cm (LPI): 100–220
100 = faster, lower detail
220 = slower, finer detail
Mode: Fill or Line (depending on project part)
Air Assist: OFF (auto handles low flow)
4️⃣ Finishing & Tips
Engrave before cutting for better precision.
Use masking tape or paper to reduce burn marks.
Make sure the plywood is flat and well-secured.
Let engraved pieces cool down before handling.
For painting options (e.g., puzzles), use water-based paint and engrave slightly deeper (70–80% power).
🔗 More info & updates
Instagram: @gkl_wooddesign
Website: gklwooddesign