HomeTemplatesDecorHome DecorWall Art
Lonestar
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Last Supper (small version)

Instruction
last supper.xcs
last supper
.xcs
Application scenario
Laser (10min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
56
649
Information
      What do you do when someone gives you a box of tongue depressors?  Grab your xTool machine and have fun!
Instruction
1
Step1: Set the tongue depressor inside your machine.

Set the tongue depressor in the machine, secure it and frame it.

2
Step2: Image framing

Select your image and import it into the xTool Creative software.  Decrease the size until it fits inside the area of the wood.  Make sure your settings are on engrave for 3mm Basswood.

3
Step3: Engrave it

Have your xTool engrave it.  You can also set your xTool to cut the very ends off the tongue depressor so that it just looks like a regular piece of small wood.  The tongue depressors are very strong for their size and readily available.  They are a great and inexpensive.  Let your creativity run with them and make whatever you want.  Enjoy!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC