Welcome Tree
Instruction
Information
Laser-cut wooden door sign with “Welcome Home” text and a decorative tree cutout. Made from 3mm plywood, A4 size. Perfect for entryways or as a warm gift. Smooth edges, original design, ready to hang or personalize. For personal use only.
Instruction
Step1
Project: Wooden Door Sign – "Welcome Home" with Tree Cutout
Laser-cut and engraved decorative sign for home entry or interior doors. Personal-use only.
📐 Material & Setup
Material: 3 mm plywood
Sheet size: A4 (210 × 297 mm)
Machine: xTool S1 – 20W diode laser
Air Assist: Auto mode (stronger during cutting)
Fixation: Flat and secured – optional 3D-printed corner jig for repeat alignment
✂️ Cut Settings (for outline, hanging holes, tree shape, letters if cut out):
Power: 95%
Speed: 6 mm/s
Passes: 1–2
Mode: Cut
Air Assist: ON (auto – high for cutting)
🔍 Engrave Settings (for engraved text or decorative elements):
Power: 60–80%
Speed: 200–250 mm/s
Lines per cm (LPI): 100–220
Lower = quicker, softer detail
Higher = slower, finer detail
Mode: Fill or Line depending on part
Air Assist: OFF (auto mode handles this)
✅ Tips for Best Results
Engrave before cutting to keep alignment perfect.
Use masking tape or masking paper to avoid burn marks.
Test engraving settings on scrap if unsure.
Let the piece cool before handling to avoid warping.
📲 More info & updates
Instagram: @gkl_wooddesign
Website: gklwooddesign
