Laser Larry
Report

Bunny Tails Welcome Sign - @5Weeks5Projects #5

Instruction
Bunny Tails Welcome SIgn.xcs
Bunny Tails Welcome SIgn
.xcs
Application scenario
Laser (45min)
Machine & module
xTool S1
Compatibles · 8
Material used
3mm Basswood Plywood
215
1576
Information
      A simple and cute "Welcome" wall hanger, especially suited as an Easter decoration. 
    
Instruction
1
Step1: Adjust the design, if needed.
Preview
Preview

This design is made to use 3 sheets of 12"x12" wood. You can adjust the size by simply resizing everything. However, don't go too small, or the "Welcome” writing will become difficult to cut.

There are also a couple small squares in the plan. These are used behind the “Welcome” lettering on the ends as spacers.

2
Step2: Cut away!
Preview
Preview

Cut the three bunnies, the “Welcome” lettering and the small spacers.

3
Step3: Paint and assemble your sign.
Preview

Gather your cut parts, the pom-pom tails, and your bow or flower.

Paint the 3 bunnies and the “Welcome” lettering with your preferred colors. I used white for the bunnies and a light aqua blue for the lettering.

When dry, glue the bunnies together, with the center bunny on top. Glue the three tails in their proper places. This will give you the correct location to glue the “Welcome” lettering on. Use a small spacer behind the letter “W” on the left and the letter “e” on the right. The spacers give the lettering more support on the ends, since they are slightly raised above the bunnies behind.

As a final touch, glue your bow or flower to the top of the middle bunny's head,

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood