Report
![[Laser cut and engrave] Laser Engraved Wooden Morse Code Receiver Chart](https://storage-us.atomm.com/resource/xart/result/430548/2703ef5a-3ca6-4cae-a3dc-453a223a645d.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Engraved Wooden Morse Code Receiver Chart
Instruction
MorseCodeReceiver
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
10WCompatibles · 12
Material used
1/8"(3mm) Birch Plywood
5
197
Information
I haven't seen this done on here yet, so why not - let the inner geek out :)
When I have time I will be adding the sender part as well.
Instruction
1
Step1: Choose your material
The project was designed for 3mm birch plywood and I like to score more than I need to as this highlights it better but here I resized everything to fit on a coaster.
If you want to resize, make sure you select everything on the canvas before doing so to keep the proportions correct.
2
Step2: Send to the laser
These are the settings I used s, as always, please ensure that you check that the settings are good for your machine - a more powerful laser will need adjusting.
If you do decide to use a coaster, then please apply a finish to protect it against moisture.
How to use? Simply start at the star shape in the middle and follow the dots and dashes you hear or see.
. -. .--- --- -.-- !
Comments
