WA CREATIONS
Report

Jesus praying acrylic Cutout 7

Instruction
JesusPraying7.xcs
JesusPraying7
.xcs
Application scenario
Laser processing、Blade cut (40min)
Machine & module
xTool D1 Pro
20W
Compatibles · 8
Accessories
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro/D1 Air Assist Set
Material used
3mm Black Opaque Glossy Acrylic
3mm Basswood Plywood
10
55
Information
      Just something to remind us of our savior. Could be cut from wood and many more products as well.
Check my profile for more.
    
Instruction
1
Step1: Setup
Preview

Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. I like to do a faster cut on acrylic and two passes with air assist for a cleaner cut so it does not melt. Size can be changed to bigger of smaller. Lay acrylic on honeycomb and adjust laser accordingly.

2
Step2: Cutting

Cut the file. I like to keep the backing paper on till after cutting. Pull of backing paper and mount.

Comments
Remixes
xTool Supplies Used in This Template
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro
xTool D1 Pro
3mm Black Opaque Glossy Acrylic
3mm Black Opaque Glossy Acrylic
3mm Basswood Plywood
3mm Basswood Plywood