HomeTemplatesDecorHome DecorWall Art
brightmakesthings
Report
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
Project made with xTool P2S machine for Laser cut and engrave.
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
Project made with xTool P2S machine for Laser cut and engrave.
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror
[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror

Lemon Lime Acrylic Mirror Wall Art Decor

Instruction
lemonmirror.xcs
lemonmirror
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
Compatibles · 10
Material used
3mm Silver Mirror Acrylic
3mm Silver Mirror Acrylic (5pcs)
43

Information

      These are just so fun! Making a fun mirror bathroom :)

Instruction

1

Step1

First I cut the mirror acrylic outline that the other acrylic piece will snap into. I keep kerf offset off for this part. Cut mirror side down.

2

Step2

Then I cut the other acrylic parts. I use kerf offset for this bit so they fit snuck in the silver frame. Cut mirror side down.

 

Note from learning the hard way: don't kerf offset so much that you have to force the pieces in- mirror acrylic is brittle and it will crack. 

3

Step3

I use the 1mm black acrylic as a backing. I put 3M adhesive tape on before cutting. Cut 3M side down. 

4

Step4

Put the pieces together. Take the adhesive off the black acrylic and stick it to the back on the mirror lined up.

5

Step5

Hang with command strips or double sided tape!

Comments

Remixes

xTool Supplies Used in This Template

xTool P2S
xTool P2S

License

CC BY-NC