Report
![[Laser cut and engrave] Metal card display frame.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/05ccad47-6c0e-46a5-a273-1bbfd96f72f7?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Metal card display frame.
Instructioncard holder
.xcs
Application scenario
Laser (3min)
Machine & module
xTool S1
40WCompatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
118
1168
Information
A way to display your favorite card engraving.
Instruction
1
Step1: Design
Preview
Preview
Preview
Make your design on xcs using rectangles and combine subtract tab.
2
Step2: Get all of your elements on the canvas.
Preview
Place all of the parts on the canvas to be cut.
3
Step3: Focus and cut.
Preview
Preview
After your parts are all cut remove from machine and assemble.
4
Step4: Glue everything together.
Preview
Preview
glue and clamp everything together.
5
Step5: stain or paint if you desire
Preview
Preview
stain paint or leave natural.
Comments
